[frezzer666]

Key hat er ja schon, also COM Port brauch er ja nicht mehr..
da der Chip jetzt nun lehr ist, ist es normal das manche SATA Controller das LW nicht mehr sehen..
spoofe denn key in IX LT 1.1 und speichere alles ab (also komplette FW)
dann unter DOS flashen

Oder probier mal das aus..

360 Modification Disc v1.52 by FrostyTheSnowman
-----------------------------------------------




Features:

- Complete Modding Solution for Samsung/BenQ/Lite-On
- iXtreme v1.51 (12x) Firmware
- Supports Samsung TS-H943
- Supports BenQ VAD6038
- Supports Lite-On DG-16D2S
- Supports Previously Modded Drives
- Supports Previously Spoofed Drives
- 100% DOS Based Dumping & Flashing
- Supports FAT32 & NTFS Filesystems (WinXP/Vista 32-Bit & 64-Bit)
- Fully Automatic Dumping & Flashing
- Step-by-Step Instructions
- Backup of all drive-related files to HDD




Changes in v1.52:

- Fixed lockup/freezing issues with NTFS drives
- Improved BenQ/Samsung dumping/flashing stability
- Replaced MS-DOS with FreeDOS (more stable)

Changes in v1.51:

- Updated all firmware to iXtreme v1.51
- 100% Support for all PC SATA & IDE DVD-ROM drives

Changes in v1.5 Revision 2:

- Improved dumping/flashing speeds for BenQ/Samsung drives
- Added 'user firmware dump verification' prompt to prevent possible BenQ bricking
- Revised menus and more detailed drive flashing/dumping instructions

Changes in v1.5 (Public Release):

- Initial release




NOTE: This disc requires a VIA VT6421 PCI SATA (or compatible) card
installed, and an NTFS or FAT32 formatted HDD/partition as the
'C:' drive for this disc to work properly.

NOTE 2: This disc *might* work with other types of SATA chipsets/cards,
but it is recommended that you use a VIA VT6421 SATA card.

NOTE 3: USB serial adapters are NOT compatible with this disc!




Usage:

- Make sure you have a VT6421 (or compatible) PCI SATA card installed in your PC

- Burn this ISO, and boot this disc in your PC

- Follow the prompts to mod any Samsung, BenQ, or Lite-On XBOX 360 DVD-ROM drive

- All firmware dumps, modified firmware, and other files related to the drive being
modified will be placed in the following directories on your 'C' drive:

Samsung TS-H943 - C:\SAMFILES

BenQ VAD6038 - C:\BENFILES

Lite-On DG-16D2S - C:\LONFILES




Disclaimer:

I take absolutely no responsibilty for the use of this disc by anyone. Use at your own risk!




Special Thanks & Credits:

Team Jungle - For the awesome iXtreme v1.51 firmware used by this disc
FreeDOS Project - For the FreeDOS Operating System used by this disc
Winternals - For the NTFSDOS driver used by this disc (NTFS Support)
Dennis Bareis - GETRESP (used to input variables into MS-DOS batch files)
Franck Uberto - XMSDSK (used to create a RAMDISK under MS-DOS)
Geremia, Modfreakz, Podger, Redline99 and Tiros - DOSFLASH (BenQ/Lite-On)
Joseph Lin - MTKFLASH (Samsung)
Caster420 - Firmtool (Samsung/BenQ/Lite-On iXtreme firmware generating)
TJ - DVDKey & DummyGen (used to dump firmware for the Lite-On drive)
DuggyUK - For information on El Torito HDD Emulation used by this disc

Download http://rs639.rapidshare.com/files/21...Disc_v1.52.zip