[ar0707]

Hallo,
der PsUpgrader 1.3 ist draußen und habe meinen Jailbreak auch erfolgreich geupdatet. Nur nach dieser Anleitung steht das eine modified 3.41 pup und zwei Lv2Diag.self brauche. Nur von wo bekomme ich die ?

Downgrader requirement
- Original PS Jailbreak USB Dongle
- PS Downgrade Coupon that has been installed onto your PS Jailbreak Device, Modified 3.41 PUP , LV2Diag.self (file 1) and LV2Diag.self (file 2)

Step 1 - Insert PS Jailbreak device that has been reprogrammed as PS Downgrade into your console

Step 2 - Turn on console using same boot method as PS Jailbreak - Press Power then immediately press eject.
You will see your console turn with PS Jailbreak lit up with red/green light followed by green only, Then it will turn off.

Step 3 - Turn on console to make sure you are in factory service mode.
You will see a huge red box on the screen saying Factory Service Mode, once confirmed please turn off console and remove PS Downgrade Dongle

Step 4 - Program any blank usb with 2 files , A) modified 3.41 pup B) Lv2Diag.self (file 1)
These must be the only files on the usb key and must be placed in the main directory of the flash drive.

Step 5 - Insert this new Flash drive into the right USB PORT of your console ( It must be placed in the outermost right port) and turn the console on.
You will see black screen but you will see flashing lights on the console (yellow) and on your USB key

Step 6 - Wait 3 minutes for the system to install the old FW,
towards the end the power button on the console will start flashing green and then your console will power off.

Step 7 - Remove the usb key and turn on the console , you will still be in factory service mode. Please verify you have downgraded successfully to version 3.41

Step 8 (Optional) - If you wish to downgrade to any older firmware you can not follow step 4,5,6 using any regular firmware PUP.
(You do not need to use modified custom firmware now that you are on 3.41)

Step 9 - Insert flash drive back into PC , remove the PUP and Lv2Diag.self and install only LV2Diag.self (file 2) on the USB Flash Drive

Step 10 - Power on your console, after 10 seconds it will power off

Step 11 - Turn on your console with no USB inserted and you will be out of factory service mode into retail mode with your chosen firmware version installed.

Mit freundlichen Gruß
ar0707