myGully.com Boerse.SH - BOERSE.AM - BOERSE.IO - BOERSE.IM Boerse.BZ .TO Nachfolger
Zurück   myGully.com > Computer & Technik > Windows & Software > Windows10
Seite neu laden

Win7 -> Win10 - Chipsatz wird nicht erkannt?

Willkommen

myGully

Links

Forum

 
Antwort
Themen-Optionen Ansicht
Ungelesen 26.08.16, 12:06   #1
Incubus99
Anfänger
 
Registriert seit: Apr 2012
Beiträge: 48
Bedankt: 4
Incubus99 ist noch neu hier! | 0 Respekt Punkte
Standard Win7 -> Win10 - Chipsatz wird nicht erkannt?

Hallo,

ich wollte meinen Rechner (Dell Optiplex 530) von Win 7 Prof 64 Bit auf Win 10 Prof 64 Bit umstellen, nachdem ich ihm eine neue SSD gegönnt habe. Leider läßt sich Win 10 nicht installieren. Die Start-DVD stürzt ab. Nachdem ich wieder Win 7 installiert und versucht habe, das Setup zu starten, kommt folgende Fehlermeldung:

Zitat:
Windows 10 kann auf diesem PC nicht ausgefürt werden:
- weil der Prozessor LAHF/SAHF nicht unterstützt
- weil der Prozessor PrefetchW nicht unterstützt.
Nach ein wenig Internet-Recherche habe ich herausgefunden, daß es ab Win 8.1 bei älteren Chipsätzen zu Problemen bei der 64-Bit-Version kommen kann. Mit Coreinfo habe ich meinen Chipsatz mal ausgelesen. Demnach müßte das alles doch eigentlich unterstützt werden?:

Zitat:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Alle Rechte vorbehalten.

E:\>Coreinfo v3.31 - Dump information on system CPU and memory topology
Copyright (C) 2008-2014 Mark Russinovich
Sysinternals - [ Link nur für registrierte Mitglieder sichtbar. Bitte einloggen oder neu registrieren ]

Intel(R) Pentium(R) 4 CPU 3.40GHz
Intel64 Family 15 Model 4 Stepping 3, GenuineIntel
Microcode signature: 00000005
HTT * Hyperthreading enabled
HYPERVISOR - Hypervisor is present
VMX - Supports Intel hardware-assisted virtualization
SVM - Supports AMD hardware-assisted virtualization
X64 * Supports 64-bit mode

SMX - Supports Intel trusted execution
SKINIT - Supports AMD SKINIT

NX * Supports no-execute page protection
SMEP - Supports Supervisor Mode Execution Prevention
SMAP - Supports Supervisor Mode Access Prevention
PAGE1GB - Supports 1 GB large pages
PAE * Supports > 32-bit physical addresses
PAT * Supports Page Attribute Table
PSE * Supports 4 MB pages
PSE36 * Supports > 32-bit address 4 MB pages
PGE * Supports global bit in page tables
SS * Supports bus snooping for cache operations
VME * Supports Virtual-8086 mode
RDWRFSGSBASE - Supports direct GS/FS base access

FPU * Implements i387 floating point instructions
MMX * Supports MMX instruction set
MMXEXT - Implements AMD MMX extensions
3DNOW - Supports 3DNow! instructions
3DNOWEXT - Supports 3DNow! extension instructions
SSE * Supports Streaming SIMD Extensions
SSE2 * Supports Streaming SIMD Extensions 2
SSE3 * Supports Streaming SIMD Extensions 3
SSSE3 - Supports Supplemental SIMD Extensions 3
SSE4a - Supports Streaming SIMDR Extensions 4a
SSE4.1 - Supports Streaming SIMD Extensions 4.1
SSE4.2 - Supports Streaming SIMD Extensions 4.2

AES - Supports AES extensions
AVX - Supports AVX intruction extensions
FMA - Supports FMA extensions using YMM state
MSR * Implements RDMSR/WRMSR instructions
MTRR * Supports Memory Type Range Registers
XSAVE - Supports XSAVE/XRSTOR instructions
OSXSAVE - Supports XSETBV/XGETBV instructions
RDRAND - Supports RDRAND instruction
RDSEED - Supports RDSEED instruction

CMOV * Supports CMOVcc instruction
CLFSH * Supports CLFLUSH instruction
CX8 * Supports compare and exchange 8-byte instructions
CX16 * Supports CMPXCHG16B instruction
BMI1 - Supports bit manipulation extensions 1
BMI2 - Supports bit manipulation extensions 2
ADX - Supports ADCX/ADOX instructions
DCA - Supports prefetch from memory-mapped device
F16C - Supports half-precision instruction
FXSR * Supports FXSAVE/FXSTOR instructions
FFXSR - Supports optimized FXSAVE/FSRSTOR instruction
MONITOR * Supports MONITOR and MWAIT instructions
MOVBE - Supports MOVBE instruction
ERMSB - Supports Enhanced REP MOVSB/STOSB
PCLMULDQ - Supports PCLMULDQ instruction
POPCNT - Supports POPCNT instruction
LZCNT - Supports LZCNT instruction
SEP * Supports fast system call instructions
LAHF-SAHF - Supports LAHF/SAHF instructions in 64-bit mode
HLE - Supports Hardware Lock Elision instructions
RTM - Supports Restricted Transactional Memory instructions

DE * Supports I/O breakpoints including CR4.DE
DTES64 * Can write history of 64-bit branch addresses
DS * Implements memory-resident debug buffer
DS-CPL * Supports Debug Store feature with CPL
PCID - Supports PCIDs and settable CR4.PCIDE
INVPCID - Supports INVPCID instruction
PDCM - Supports Performance Capabilities MSR
RDTSCP - Supports RDTSCP instruction
TSC * Supports RDTSC instruction
TSC-DEADLINE - Local APIC supports one-shot deadline timer
TSC-INVARIANT - TSC runs at constant rate
xTPR * Supports disabling task priority messages

EIST * Supports Enhanced Intel Speedstep
ACPI * Implements MSR for power management
TM * Implements thermal monitor circuitry
TM2 - Implements Thermal Monitor 2 control
APIC * Implements software-accessible local APIC
x2APIC - Supports x2APIC

CNXT-ID * L1 data cache mode adaptive or BIOS

MCE * Supports Machine Check, INT18 and CR4.MCE
MCA * Implements Machine Check Architecture
PBE * Supports use of FERR#/PBE# pin

PSN - Implements 96-bit processor serial number

PREFETCHW - Supports PREFETCHW instruction

Maximum implemented CPUID leaves: 00000005 (Basic), 80000008 (Extended).

Logical to Physical Processor Map:
** Physical Processor 0 (Hyperthreaded)

Logical Processor to Socket Map:
** Socket 0

Logical Processor to NUMA Node Map:
** NUMA Node 0

No NUMA nodes.

Logical Processor to Cache Map:
** Data Cache 0, Level 1, 16 KB, Assoc 8, LineSize 64
** Unified Cache 0, Level 2, 2 MB, Assoc 8, LineSize 128

Logical Processor to Group Map:
** Group 0

E:\>
Kann mir irgendwer weiterhelfen, wo das Problem liegt? Ich will halt ungerne mit Win7 weitermachen (Updates). Und es scheint ja zu gehen, wenn ich mir dieses Video hier anschaue (ich habe die gleiche Modellreihe): [ Link nur für registrierte Mitglieder sichtbar. Bitte einloggen oder neu registrieren ]
Incubus99 ist offline   Mit Zitat antworten
Ungelesen 26.08.16, 13:46   #2
rexgullx
Profi
 
Registriert seit: Aug 2010
Beiträge: 1.829
Bedankt: 7.268
rexgullx leckt gerne myGully Deckel in der Kanalisation! | 2147483647 Respekt Punkterexgullx leckt gerne myGully Deckel in der Kanalisation! | 2147483647 Respekt Punkterexgullx leckt gerne myGully Deckel in der Kanalisation! | 2147483647 Respekt Punkterexgullx leckt gerne myGully Deckel in der Kanalisation! | 2147483647 Respekt Punkterexgullx leckt gerne myGully Deckel in der Kanalisation! | 2147483647 Respekt Punkterexgullx leckt gerne myGully Deckel in der Kanalisation! | 2147483647 Respekt Punkterexgullx leckt gerne myGully Deckel in der Kanalisation! | 2147483647 Respekt Punkterexgullx leckt gerne myGully Deckel in der Kanalisation! | 2147483647 Respekt Punkterexgullx leckt gerne myGully Deckel in der Kanalisation! | 2147483647 Respekt Punkterexgullx leckt gerne myGully Deckel in der Kanalisation! | 2147483647 Respekt Punkterexgullx leckt gerne myGully Deckel in der Kanalisation! | 2147483647 Respekt Punkte
Standard

Bedingt jein...

Windows 10 kann auf diesem PC nicht ausgefürt werden:
- weil der Prozessor LAHF/SAHF nicht unterstützt
- weil der Prozessor PrefetchW nicht unterstützt.

Das stimmt so. Nur die mit "*" gekennzeichneten Eigenschaften werden unterstützt.

Was dir bliebt ist Windows 10 32-Bit zu installieren.

Für ein 64-Bit-Upgrade muss die CPU auch PrefetchW und LAHF/SAHF unterstützen. Microsoft hat dies nicht angegeben, aber diese Voraussetzungen galten bereits für Windows 8/Windows 8.1.
rexgullx ist offline   Mit Zitat antworten
Die folgenden 2 Mitglieder haben sich bei rexgullx bedankt:
Incubus99 (23.01.20)
Ungelesen 26.08.16, 16:37   #3
Incubus99
Anfänger
 
Registriert seit: Apr 2012
Beiträge: 48
Bedankt: 4
Incubus99 ist noch neu hier! | 0 Respekt Punkte
Standard

Schade. Trotzdem vielen Dank, dann weiß ich Bescheid.
Incubus99 ist offline   Mit Zitat antworten
Antwort


Forumregeln
Du kannst keine neue Themen eröffnen
Du kannst keine Antworten verfassen
Du kannst keine Anhänge posten
Du kannst nicht deine Beiträge editieren

BB code is An
Smileys sind An.
[IMG] Code ist An.
HTML-Code ist Aus.

Gehe zu


Alle Zeitangaben in WEZ +1. Es ist jetzt 04:52 Uhr.


Sitemap

().